10m height 3mm thickness hot dip galvanized octagonal shape street
lamp poles for highway
Round tapered(conical) street light poles are most widely used
worldwide in street lighting. By utilizing a wide range of advanced
equipments, Shuguang design and manufacture steel round tapered
poles and brackets in various patterns to conform to variety of
requirements from our customers all over the world.
Our round tapered poles are available in mounting height from 3 to
14m(one piece joint),two moulds are available with us: one taper is
11/‰,the other 14/‰,poles of taper 10-15‰ can be made. The poles
can be used for post top or bracket arm applications. Integral
bracket arm arrangements are also available.
Zhejiang Shuguang Lamps CO., LTD. is fully ISO 9001 compliant and
its welding procedures are in conformity with BS EN 287,BS EN ISO
15614-1 and AWS D1.1
Maximum length(one piece): 14m
Minimum top diameter: 60mm
The thickness of galvanization will be according to thickness of
Normally 4mm pole, average thickness of galvanization is at average
From 6m to 20m
3mm to 10mm
Polygonal or Conical
Hot dip galvanized Following ASTM A 123, or customized.
Length of per section
Within 15 meter once forming
ISO 9001:2008 , CE
AWS (American Welding Society ) D 1.1
Tolerance of the
According to client’s requirement.
Joint of Poles
Slip joint, flanged connected
Raw material test → Cutting →bending →Welding (longitudinal
)→Dimension verify →Flange welding →Hole drilling →sample assemble
→ surface clean→ Galvanization or powder coating ,painting
Packing with plastic bubble paper and blanket or according to
If you have doubts about our product, please contact us. You can
also contact us if you have special needs. Discount is negotiable
if it is large order.
No crack, no leakage welding, no bite edge, weld smooth level off
without the concavo-convex fluctuation or any welding defects.
Hot Dip Galvanizing Process:
Inside and outside surface anti-corrosion treatment by hot dipping
acid. Zinc coating is more than 85 um thick, which is in accord
with GB/T13912-92 standard. Designed life of pole is more than 30
years, and the galvanized surface is smooth and with the same
color. Flake peeling hasn’t been seen after maul test.
Powder Coating Process:
Pure polyester plastic powder coating is stable, and with strong
adhesion & strong ultraviolet ray resistance. Film thickness is
more than 100 um and with strong adhesion. The surface is not
peeling even with blade scratch (15 * 6 mm square). Surface is
smooth and color and luster are identical.
Lifetime: >20 years
Color: (grey)or customized